Medical care robots being made with 3D origami in B.C. lab

The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)
This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)

A B.C. professor would like to see a robot take your vitals when you visit a doctor in the somewhat near future.

Dr. Woo Soo Kim, associate professor of mechatronic systems engineering at Simon Fraser University, has developed health care robots that can measure heart rate, respiration rate, temperature and oxygen levels. The oxygen level measurement in particular could be used to monitor severe COVID-19 patients.

He hopes the sensor robots can support doctors and nurses, and is currently using two prototypes to collaborate with a team of Vancouver Coastal Health researchers on how a technology like this could be applied in practice.

There’s a lot to be worked out — including how comfortable will patients be receiving care from a robot – but Kim hopes to have sensing robots in health care in five to 10 years. He imagines a full complement of medical care robots, including passive bots that take vitals, companion bots that would hang out with patients to regularly monitor vitals so people don’t need to wear an uncomfortable device, and even receptionist bots.

We might already be warming up to machine-based medical care, as a recent report indicated most British Columbians now prefer virtual meetings with their doctors for routine check ups.

READ MORE: Majority of British Columbians now prefer routine virtual doctor’s visits: study

His lab, Additive Manufacturing in SFU’s Surrey campus, has been working on advanced 3D printing, wearable technology and sensing robots since he arrived in 2010, and narrowed their focus health care uses in 2018. He works with six to seven students and interns.

Now they have two working prototypes to take to doctors and nurses. One is an arm, completely made in the lab with 3D printed origami. The second machine is a shiny, white humanoid that Kim’s lab has added on their own hand with highly specialized electron sensors.

The origami design was chosen not just because it’s cool. His lab has spent years testing various architectural solids with 3D printing, and found that “3D origami structures have naturally less fatigue characteristics with re-configurable structures. So, it’s good if they are used for bending structures such as our fingers,” Kim said.

Funding has been partially provided by the Natural Sciences and Engineering Research Council of Canada, and the lab is applying for more grants to expand development.

The first stage of robotic health care is passive, with the machines gathering information and sharing results with human health care professionals, but Kim envisions future machines that could be more involved.

Do you have something to add to this story or something else we should report on? Email: zoe.ducklow@blackpress.ca


BC HealthScience

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Photo collage of loved ones lost to substance use and overdose. (Photo courtesy Moms Stop The Harm)
B.C. overdose deaths still rising five years after public health emergency declared

Moms Stop the Harm calls on B.C. to provide safe supply in response to deadly illicit drug use

A black bear tries to get at a bird feeder at a home near Williams Lake. (Laura Ulrich photo)
Managing bear attractants a top priority in B.C. for 2021: Conservation Officer Service

Garbage, fruit trees, bird feeders, compost and livestock are common attractants for bears

B.C. Cattlemen’s Association general manager Kevin Boon. (B.C. Cattlemen’s Association photo)
COVID, BSE, water access and private land rights: B.C. Cattlemen’s general manager weighs in

Kevin Boon said positive aspect of pandemic is more people interested in where their food comes from

Restaurant patrons enjoy the weather on a patio in Vancouver, B.C., Monday, April 5, 2021. The province has suspended indoor dining at restaurants and pubs until at least April 19 in B.C. due to a spike in COVID-19 numbers. THE CANADIAN PRESS/Jonathan Hayward
B.C. sets new COVID-19 daily record with 1,293 cases Thursday

New order allows workplace closures when infections found

The board is planning a 2021 festival no matter the conditions, they are going to make it work! (BCMF directors Buddy Thatcher (from left), Kristen Boulier, Rose Clark, Jeff Gray, Corissa McNeilly and Jayme Kennedy (front), and her hair. (photo submitted)
Bella Coola Music Festival planning on 2021 fest

The BCMF is planning for a 2021 festival on July 17 and 18, however it may look.

A person receives a COVID-19 vaccine at a vaccination clinic run by Vancouver Coastal Health, in Richmond, B.C., Saturday, April 10, 2021. THE CANADIAN PRESS
B.C. sees 873 more COVID-19 cases Tuesday, decline continues

Hospitalizations up to 377, two more deaths for 1,515 total

Restaurant patrons enjoy the weather on a patio in Vancouver, B.C., Monday, April 5, 2021. The province has restricted indoor dining at all restaurants in B.C. due to a spike in COVID-19 numbers. THE CANADIAN PRESS/Jonathan Hayward
B.C.’s COVID-19 indoor dining, drinking ban extending into May

Restaurant association says patio rules to be clarified

Two men walk past a sign on Main Street in downtown Vancouver, B.C., Monday, April 5, 2021. THE CANADIAN PRESS/Jonathan Hayward
Calls for government transparency in COVID data continue as B.C.’s 3rd wave wears on

Social media, where both information and misinformation can spread like wildfire, has not helped

Two men were seen removing red dresses alongside the Island Highway in Oyster Bay. (Submitted photo)
Observers ‘gutted’ as pair filmed removing red dresses hung along B.C. highway

Activists hung the dresses to raise awareness for Indigenous Murdered/Missing Women & Girls

A grey whale off the coast of Vancouver Island is being monitored by Canadian and U.S. researchers, as it has developed lesions after being tagged last year. To try and prevent systemic infection from developing, the team administered antibiotics to the whale on March 31 and April 1. (Photo from the NOAA Fisheries website)
Grey whale off Vancouver Island develops lesions after being tagged, researchers monitor its condition

Canadian and U.S. whale experts administered antibiotics to the animal on March 31, April 1

Cannabis bought in British Columbia (Ashley Wadhwani/Black Press Media)
Is it time to start thinking about greener ways to package cannabis?

Packaging suppliers are still figuring eco-friendly and affordable packaging options that fit the mandates of Cannabis Regulations

Sharis Carr, a nurse at the Aaron E. Henry Community Health Service Center in Clarksdale, Miss., holds a box containing doses of the Johnson & Johnson COVID-19 vaccine Wednesday, April 7, 2021. The U.S. is recommending a “pause” in using the single-dose Johnson & Johnson COVID-19 vaccine to investigate reports of potentially dangerous blood clots. (AP Photo/Rogelio V. Solis)
EXPLAINER: What’s known about COVID vaccines and rare clots

These are not typical blood clots – they’re weird in two ways

Titanic was the largest and most luxurious ship in the world. Photo provided and colourized by Jiri Ferdinand.
QUIZ: How much do you know about the world’s most famous shipwreck?

Titanic sank 109 years ago today, after hitting an iceberg

Most Read